Services
Well pumps, pressure systems, water lines and water treatment
Everything we do starts the same way: measure the system, find the actual fault, then price the fix. Here is the full list, grouped by what it solves.
01 / Pumps
Well pumps & pressure systems
Repair, replacement, installation and the controls that keep pressure steady.
- 01 Well pump repair Diagnosis and repair for submersible, jet and booster pumps that have stopped, slowed down or started short-cycling.
- 02 Well pump installation New submersible, jet and booster pump installation sized to the well yield, the depth and what the house actually uses.
- 03 Well pump replacement Pulling an ageing or failed pump and setting a new one, with the well, the drop pipe and the controls inspected while it is open.
- 04 Emergency pump repair Around-the-clock response for no-water calls, burst lines, failed pressure tanks and pumps that will not shut off.
- 05 Well pump maintenance A scheduled look at the pressure tank, switch, controls and water quality before something fails on a Sunday.
- 06 Pump diagnostics Pressure, amperage, flow and drawdown testing to find the actual fault instead of replacing parts by guesswork.
- 07 Low water pressure Tracking down whether the pressure loss is the tank, the switch, a clogged filter, the pump, or the well itself.
- 08 Pressure tank repair Testing pre-charge, replacing failed bladders and sizing a new tank so the pump stops short-cycling.
02 / Lines
Water lines
From the well head to the house, including trenchless replacement.
03 / Water
Water treatment & testing
Filtration, softening, purification and the testing that decides which you need.
- 11 Well water filtration Whole-house filtration designed from a water test — sediment, iron, manganese, sulphur and taste, not a generic cartridge.
- 12 Water softening Removing the calcium and magnesium that scale heaters, spot glassware and shorten appliance life.
- 13 Well water purification UV sterilisation, arsenic and nitrate treatment for wells where filtration alone is not enough.
- Testing Well water testing Sampling and interpretation for bacteria, nitrate, arsenic, iron, manganese, hardness and pH.
04 / Systems
Systems & contracting
Whole-system design and the legacy service pages from the original site.
- System Water pump systems Complete systems — pump, drop pipe, pressure tank, controls and storage — designed as one machine rather than a set of parts.
- Treatment Water conditioning Correcting hardness, acidity and corrosivity so water stops eating plumbing and staining fixtures.
- Treatment Water treatment Whole-house treatment trains for the iron, sulphur, sediment and hardness common in Lane County wells.
- Contractors Well pump contractors What to look for in a well pump contractor, and what the work should include from diagnosis to commissioning.
- Coast Coastal pump specialist Pump and water system work for coastal and Coast Range properties, where corrosive water and salt intrusion change the rules.
How it starts
Diagnosis is the service
Most of the expensive mistakes in well service come from replacing the wrong part. A pump gets swapped when the tank was waterlogged. A softener gets sold when the problem was iron. A tank gets replaced when the switch had drifted.
So the first visit is measurement: pressure at the tank, amp draw at the controller, static and pumping water level where accessible, flow at a downstream tap, and a water sample when quality is part of the complaint. From those numbers the repair is usually obvious.
If you already know what you need, say so and we will quote it. If you do not, that is what the diagnostic visit is for.
Talk to a well tech
Not sure which service you need?
Describe what the water is doing. We will tell you what it sounds like and what it usually costs to find out.
Request service
Book a visit
Send the details and we will call back with a time.
Phone
Based in
22071 Fisk Rd
Noti, OR 97461
Emergency
24 hours a day for no-water calls, burst lines and pumps that will not stop.